- with pressure gauge 0–0.6 bar
- hose connections 2× 16 mm + 2× 19 mm
- measuring range volume 2–14 Nm³/h
- calibration cuvette 16 mm for photometer OPTI
- COD standard solution bottle a 30 ml
- outdoor probe
- 5 m cable
- carrying case and operating instructions
- measurement results can be stored on memory medium
- probe also suitable for HQ30D/HQ40D
- outdoor probe
- 1 m cable
- carrying case and operating instructions
- measurement results can be stored on memory medium
- probe also suitable for HQ30D/HQ40D
- ready-to-use cuvette tests
- pre-dosed reagents for photometric evaluation
- waterproof dissolved oxygen meter (DO) with fixed sensor 2 m
- measuring range O2: 0,0 to 20,0 mg/l (or ppm) O2 concentration 0,0 to 200,0 % sat O2
- delivery condition: sensor filled, ready for operation
- scope of delivery:
- instrument with sensor
- instruction
- 2× battery
- spare membrane head
- working temperature: device -20 to +50 °C, sensor -0 to +40 °C
- including galvanic oxygen sensor with temperature measurement
- not suitable for waste water
- waterproof dissolved oxygen meter (DO) with fixed sensor 4 m
- measuring range O2: 0,0 to 20,0 mg/l (or ppm) O2 concentration 0,0 to 200,0 % sat O2
- delivery condition: sensor filled, ready for operation
- scope of delivery:
- instrument with sensor
- instruction
- 2× battery
- spare membrane head
- working temperature: device -20 to +50 °C, sensor -0 to +40 °C
- including galvanic oxygen sensor with temperature measurement
- not suitable for waste water
- Ammonium NH4 10–400 mg/l
- 100 measurements
- for 100 measurements
- Nitrite NO2 1–80 mg/l, nitrate NO3 10–500 mg/l
- 100 measurements
- with pressure gauge 0–0.6 bar
- hose connections 2× 16 mm + 2× 19 mm
- hose connection elbow 19 mm
AQUATO® TOPSELLER
- AQUATO® menu structure
- for AQUATO SBR, fixed bed and moving bed systems as well as trickling filter systems and plant beds
- 4 cables with square plugs for the valves Possibility of pressure and current monitoring
- integrated power failure notification
- use for 3 or 4 valve manifolds
- optional connection of a clear water pump
- IoT capability/portal required
- AQUATO® menu structure
- universal control for SBR, SSB®, fixed bed, moving bed, trickling filter systems and plant beds
- 2 float switch inputs
- 6 individually assignable outputs
- easy connection of existing valves and aggregates
- internal thermostat for control of a cabinet ventilation or heating system
- power failure message as well as current & pressure monitoring
- drain class C, N, D, D+P, D+H, D+P+H
- connection of an additional high water detector
- also suitable for plants of other manufacturers
- 2nd compressor, additional compressor (only for aeration), charging pump, clear water pump, excess sludge pump, buffer pump/siphon,
dosing pump for effluent class D+P, UV lamp for effluent class D+H, additional timed relays for all free outputs
- submersible up to 12 m deep
- suitable for pumping clean, chemically neutral water
- for use in cisterns and rainwater tanks
- integrated pressure switch for automatically switching the pump on and off
- integrated floating switch as dry-run protection
- housing is supplied without lock, key and without base plate for the compressor
- including fastening set
- connection pipe sideways G 1" male
- without connection cable